Low Pressure High Altitude Test Chamber

• Max Diameter of Workpiece: 2100mm
• Mass Scope of Workpiece: <900kg
• Type: Altitude Test Chambers
• Maxcapacity: >1000KN
• Accuracy Grade: 0.5
• Load Way: Electronic Load
• Model NO.: GATC-150
• Loading Method: Dynamic Load
• Display: Digital
• Control: Computer Control
• Weight: 100-500Kg
• Power Source: AC380V
• Oil Cylinder Position: Top
• Cooling Rate: 0.7c~1.0c/Min (Average)
• Pressure Range: RP~0.5kpa
• Temp Fluctuation: +/-0.5%
• Temp Range: 70c~+150c
• Transport Package: Strong Wood Case
• Specification: 1000*1600*1400mm
• Trademark: Grande
• Origin: China
• HS Code: 9031200020
• Production Capacity: 100set/Month

Product Description

Detailed Photos

Low Pressure High Altitude Test Chamber

Product description:
High altitude low pressure simulation test chamber/Altitude test chamber
Altitude Test Chambers
Temperature testing at altitudes up to 100,000 feet.
Grande can provide custom-built chambers for simultaneous testing of temperature and low-pressure altitude conditions. Two common applications are:

• Testing of avionics or other aerospace equipment to simulate actual conditions it might experience.
• Simulation of high-altitude conditions like might be found in mountainous regions.

NOTE: Altitude test chambers are custom systems, and differing requirements may significantly change the cost and utility requirements. Please let Grande know as much detail as possible about your anticipated testing specification/method, and we can provide you with a tailored system for your requirements.
Features

• Temperature range from -160 to 200°C
• Altitude range from ground to 100,000 feet
• Optional humidity control when altitude system is off
• Chamber interior size specified by customer
• Automatic altitude control, integrated with temperature controller
         -No manual setting of altitude level!
• Vacuum pump sized for climb/dive rate required by application
• Viewing window and cable ports available

Corresponding Standard of the Temperature and Humidity Test Chamber:
1.GB10590-89  Low-temperature and low atmospheric pressure testing condition
2.GB10591-89 High-temperature and low atmospheric pressure testing condition
3. GB11159-89 low atmospheric pressure technical condition
4. GB/T2423.25-1992 Low-temperature and low atmospheric pressure test chamber
5. GB/T2423.26-1992 High-temperature and low atmospheric pressure test chamber
6.GJB150.2-86 High-temperature and low atmospheric pressure(Altitude) test
7,IEC60068-2-1.1990 Testing methods of Low-temperature test chambers
8,IEC60068-2-2.1974 Testing methods of High-temperature test chambers
9,IEC-540
10,ASTM D2436
11,JIS K7212
12,DIN 50011
13,BS2648
14,Mil-Std 202G (conditions 105C, A/B/C/F)
15,Mil-Std 810G (condition 500.5)
16,IEC 60068-2-39
17,IEC 60068-2-40
18,RTCA/DO-160F
19,JIS W 0812

Product Parameters

 

Model No			GATC-150	GATC-225		GATC-408		GATC-800		GATC-1000
Working room(L)			150	225		408		800		1000
Inner chamber size(mm)W*H*D			500*600*500	500*750*600		600*850*800		1000*1000*800		1000*1000*1000
Exterior chamber size(mm)W*H*D			1000*1600*1400	1000*1750*1500		1100*1850*1700		1500*2000*1700		1850*1600*2250
Packaging volume(CBM)			3	3.5		4.5		5.5		6
G.W.(KGs)			320	350		400		600		700
Testing temperature range			-160ºC,-150ºC,-120ºC,-100ºC,-80ºC,-70ºC,-60ºC,-40ºC,-20ºC,0ºC~+150ºC,200ºC, 250ºC,300ºC,400ºC,500ºC
Performance	Temperature range		-160ºC,-150ºC,-120ºC,-100ºC,-80ºC,-70ºC,-60ºC,-40ºC,-20ºC,0ºC~+150ºC,200ºC, 250ºC,300ºC,400ºC,500ºC
	Humidity range		20%RH ~98%RH(Option 10%RH ~98%RH or 5%RH ~98%RH)
	Temp.fluctuation		±0.5ºC(Room pressure)
	Temp.accuracy		±2.0ºC(Room pressure)
	Heating up time		≤60min(+20ºC~+150ºC,RP,No-Load)
	Cooling down time		≤45min(RP)		≤60min(RP)				≤90min(RP)
	Pressure range		RP~0.5kPa
	Pressure control tolerance		±0.1kPa(≤2kPa),±5%(2kPa~40kPa),±2kPa(≥40kPa)
	Depressurization time		≤20min		≤25min		≤30min		≤45min	≤50min
Working environment			Temp:+5ºC~+35ºC;Humidity:≤90%RH;Airpressure:86-106kPa
Material		Exterior chamber materia	Stainless steel plate+ powder coated
		Inner chamber materia	SUS#304 stainless steel plate
		Insulation Material	PU Fiberglass wool
System		Air circulation system	Cooling fan
		Heating System	SUS#304 stainless steel high-speed heater
		Humidification system	Imported compressor,Tecumseh compressor(or Bizer Compressor),finned type evaporator,air(Water)-cooling condenser
		Dehumidification system	ADP critical dew point cooling/dehumidifying method
		Controlling system	TEMI880,990
Power kw			8		10		12		15	20
Water supply			Water temperature:≤30ºC;water pressure:0.2~0.4MPa;flow rate:≥10T/h
Other components			Specimen holders 2pcs,electrical wire 1pc(3M),pressure testing port.
Safety protection device			Over-heat protection circuit breaker,Compressor overload protection,Control system overload protection,Humidifying system overload protection,Overload indicator lamp.
Power supply			AC 3Ψ380V 60/50Hz
Customized service			Welcome to Non-standard,Specail requirements,OEM/ODM orders.

 

Optional accessories
1,Low Humidity and Dehumidifying sytstem.
2,Inner glass door with manual operating ports.
3,Temp./Humi.Recorder.
4,Pure water treatment device
5,RS-485 interface can be linked to Personal computer(PC) and achieve multi-level control & recording software management.
6,Liquid nitrogen(LN2)/Liquid Carbon Dioxide(LCO2) fast cooling-down system.

Company Profile

Customer Visiting

 

Certifications

Packaging & Shipping

 

Packaging:
Strong wooden Case.

Shipping:
We have the excellent cooperative forwarder to support transportation service including FOB, CIF, DDP and so on, to satisfy customer's special demands.

Service:
GRANDETOP has Markets, sales, technical service and network team to provide customers and dealers with comprehensive pre-sales, in-sales and after-sales services. You can communicate with us if you have any questions and requirements.
24 hours online. Messages will be replied as soon as they are received.

 

FAQ

 

Q1:Are you manufacturer?
Yes,we are manufacturer.You are welcome to visit our company and check every steps which we are manufacturing Environmental test chambers.

Q2:Which languages can your team support?
Our team can support you English, Chinese,Spanish(Español), Indonesian(Bahasa Indonesia),Japanese.

Q3: If we order is big test chambers from you,how should we install it at our side?
We offer the service of on-site installation and trainning for you.

Q4: Excellent after sale service?
Free parts warranty for 12 months.We can offer support via email,telephone,skype.,etc.On-site technical support can be available with charges by the customer.

Q5:Good Packaging:
The chamber will be covered with air bubble film before put into wooden case, which not only has good shock absorption, impact resistance,heat sealingand also has the advantages of nontoxic,odorless,moisture corrosion,good transparency.