Factory Hot Sale Rapid Temperature Change Test Chamber Lab Machine

• Power Supply: 110V;220V;380V 60/50Hz
• Certification: CE, ISO
• Warranty: 2 Years
• Insulation Material: PU&Fiberglass Wool
• Inner Chamber Material: SUS#304 Stainless Steel Plate
• Exterior Chamber Material: SUS#304 Stainless Steel Plate+Power Coated
• Model NO.: GTC
• Transport Package: Strong Wooden Case
• Specification: 400mm*500mm*400mm
• Trademark: Grandetop
• Origin: China
• Production Capacity: 150/Month

Product Description

Fast Change Rates Test Chamber

Fast change rates testing chamber is suitable for testing the changes of instruments,electrical,electronic products,machine and parts under the rapid temperature change or the gradient conditions, takes advantage of compact, modern scroll compressors to bring fast temperature cycling to small form factor. Temperature cycling rates from 3 to 30°C/min. are possible.The temperatures range are

available:-160ºC,-150ºC,-120ºC,-100ºC,-80ºC,-70ºC,

-60ºC,-40ºC,-20ºC,0ºC~+150ºC,200ºC,250ºC,300ºC,400ºC,500ºC,600ºC,700ºC,800ºC,900ºC,1000ºC.

The faster cycle times can be used to meet more aggressive test methods that require thermal stress during transitions. Significant test time can be saved in completing tests, as well.

To demonstrate performance, Grande uses the international standard IEC 60068 3-5 measured at the supply air. Temperature cycles are run from hot  to cold extremes, and the middle 80% of the transition is timed to determine performance. Your actual cycling results will vary depending on methodology, including the start and end temperatures, and the amount of samples loaded.

 

 

Features

QUALITY CONSTRUCTION

Stainless steel exterior and interior

Rounded interior corners for easy cleaning

Full thermal break around doorframe and door

Rotating door latch is easy and secure

Dual-layer insulation of fiberglass and expanded foam for thermal integrity

One 2" (50mm) to One 4" (100mm) diameter cable port on the left, with an impervious, flexible silicone plug

Easy lift-off service panels 

Pressure relief port to allow air volume changes due to rapid temperature changes

Three levels of overheat protection

 

GRANDETOP® control software makes it possible to manage, monitor and assist the chamber anywhere, at any time, in multiple ways via the on board panel and desktop/mobile devices (WiFi, Ethernet, mobile network).The chamber wireless (WiFi) connection permits operation using tablets and smartphones (iOS or Android compatible).The operator interface can also be remotely accessed through a chamber connection to the customer's LAN or via mobile network (on activation of a SIM card data). It includes the 24 Hours interactive assistance system.

Main features

• WiFi or Ethernet connection to the chamber

• Visualization and graphical analysis of measures and recordings

• Synoptic charts of the entire system

• Multilanguage support

• High configurability of chamber parameters

• Unlimited measures recording possibilities

• Program and Manual chamber operation modes

• Delayed start of a program

• Possibility to select more than one chamber from a single Tablet: secure access by means of multiple password levels

• Automatic notifications of event and alarms

• Archive manager for easy access to the stored recordings

• Possibility to send email notification

• Possibility to send SMS notification (SIM card required)

• Multichamber management

• System available in several languages

 

FTF PROGRAMMER/CONTROLLER

Popular PID controller with touch-screen operation

Stores 120 different profiles with up to 1200 steps each (ramp, soak, jump, auto-start, end)

Step types include: ramp, soak, jump, auto-start, and end

Ethernet interface for remote monitoring and operation

RECOMMENDED OPTIONS

Dry air purge, to compensate for quickly shrinking air during cooling, as well as to reduce risk of condensation.

Product temperature control, allows feedback from a second sensor on the product. Ensures faster completion of transition steps.

 

Technical parameters:

Model No		GTC-080	GTC-150	GTC-225	GTC-306	GTC-408	GTC-800	GTC-1000
Working room(L)		80	150	225	306	408	800	1000
Working room(L)		400*500*400	500*600*500	500*750*600	600*850*600	600*850*800	1000*1000*800	1000*1000*1000
Inner chamber size(mm)W*H*D		900*900*1500	950*1500*1050	1500*1800*1550	1600*2030*1550	1600*2030*1750	2100*2280*1950	2100*2280*1950
G.W.(KGs)		380	450	480	550	600	800	900
Testing temperature range		-160ºC,-150ºC,-120ºC,-100ºC,-80ºC,-70ºC,-60ºC,-40ºC,-20ºC,0ºC~+150ºC,200ºC, 250ºC,300ºC,400ºC,500ºC,600ºC,700ºC,800ºC,900ºC,1000ºC
Rapid Changes Temp.Range		-70ºC:-50~+85ºC(KS);-40ºC:-20~+85ºC(KL);-20ºC:0~+85ºC(KL)
Heating & Cooling Rate		3°C/min, 5°C/min, 8°C/min, 10°C/min, 15°C/min,20°C/min,25°C/min,30°C/min linear  or nonlinear average
Performance	Temperature range	-160ºC,-150ºC,-120ºC,-100ºC,-80ºC,-70ºC,-60ºC,-40ºC,-20ºC,0ºC~+150ºC,200ºC, 250ºC,300ºC,400ºC,500ºC
	Humidity range	20%RH ~98%RH(10%RH ~98%RH or 5%RH ~98%RH)
	Temp.fluctuation	±2.0ºC
	Temp.Uniformity	±1.5ºC
	Temp.resolution	0.01ºC
	Heating rate	-70~150ºC<60min;-40~150ºC<50min;+20~150ºC<35min
	Cooling rate	+20~-70ºC<70min;+20~-40ºC<55min;+20~-20ºC<35min

 

Optional accessories

1,Inner glass door with manual operating ports.

2,Temp./Humi.Recorder.

3,RS-485 interface can be linked to Personal computer(PC) and achieve multi-level control & recording software management.

4,Liquid nitrogen(LN2)/Liquid Carbon Dioxide(LCO2) fast cooling-down system.