Drive-in Environmental Chamber Temperature for Car Climatic Test

• Certification: CE, TUV, ISO
• Warranty: 1 Year
• Product Name: Drive-in Test Chamber
• Temperature Range: -60ºC~+70ºC
• Humidity Range: 30~90%Rh
• Temp.&Humi.Fluctuation: ±0.3ºC;±2.5% Rh
• Model NO.: GDI
• Temp.&Humi.Uniformity: ±0.1ºC;±5% Rh
• Inner Chamber Material: Stainless Steel Plate+ Powder Coated
• Exterior Chamber Material: SUS#304 Stainless Steel Plate
• Wind Circulation: Sirocco Fans
• Humidifying System: Surface Evaporating System
• Heating System: SUS#304 Stainless Steel High-Speed Heater
• Transport Package: Strong Wooden Case
• Specification: Custom
• Trademark: Grande
• Origin: China
• HS Code: 8479899990
• Production Capacity: 300sets/Month

Product Description

Drive-In test chamber/Drive-in test room
Drive-In test chamber Custom Systems for Vehicle Testing

Environmental testing of automobiles requires additional consideration of the facility where the chamber will be installed, and its planned use. Test methods for vehicles can include additional conditions besides temperature and humidity in an attempt to simulate real-world conditions.

Chassis Dynamometer or Four-post road simulator

Grande builds special floor interfaces to allow use of these additional types of equipment supplied by other vendors.

Infrared Lighting

Grande builds infrared systems to create radiant surface heating of vehicles to look for deformation and other quality problems. These systems can be adjusted vertically and angled to ensure even coverage.

Running vehicle

From cold-start to high-heat stress, a running engine is a common need, but complicated requirement fresh air must be conditioned and introduced to the chamber to make up for that used in combustion. Also the exhaust must be safely removed from the chamber.

Technical parameters:

Model No			GDI
Working room(L)			Please kindly give us your request and details,it is custom service.
Inner chamber size(mm)W*H*D
Temperature Range			0ºC;-20ºC;-40ºC;-60ºC~+70ºC(+80ºC)
Humidity Range			30~90%RH
Performance	Temp.&Humi.Fluctuation		±0.3ºC;±2.5%RH
	Temp.&Humi.Uniformity		±0.1ºC;±5%RH
	Temp.&Humi.Resolution		0.1ºC; 0.1%RH/0.01; 0.1%RH
	Heat up time(20ºC~high temp.)	ºC	80
		min	50
	Cool down time(20ºC~low temp.)	ºC	0	-20	-40
		min	55	70	100
Material	Inner chamber material		Stainless steel plate+ powder coated
	Exterior chamber material		SUS#304 stainless steel plate
	Insulation Material		Polyurethane foam 100mm(75mm)(50mm)
System	Wind Circulation		Sirocco fans
	Heating system		SUS#304 stainless steel high-speed heater
	Humidifying system		Surface evaporating system
	Refrigeration system		Imported compressor,Tecumseh compressor(or Bizer Compressor),finned type evaporator,air(Water)-cooling condenser
	Dehumidifying system		ADP critical dew point cooling/dehumidifying method
	Controlling system		PID Digital electronic indicators+S.S.R.With PID automatic calculation capability
Other Components			Vaccum glass inspection window, cable port(50mm), control status indicator lights, chamber lamp, loading shelves(2pcs for free)
Safety protection device			Over-heat protection circuit breaker,Compressor overload protection,Control system overload protection,Humidifying system overload protection,Overload indicator lamp.
Power Supply			3Ψ 380V 60/50Hz
Customized service			Welcome to Non-standard,Specail requirements,OEM/ODM orders.
The technical information will be subjected to change without notice